Jig and Fixture ~Turbine Blade Repaire

This is a jig for a turbine blade. Did u know how turbine blade are/is? In one turbine impeller normally have many blades(this is one of the turbine type). The blades are placed around the shaft to become a one big impeller. If this is one of the type of turbine impeller, normally the blades will worn at outside diameter. To repaire the blade, we welding the worn side and regrinding it. This jig designed to hold/grip the blade when grinding process. The blade have their diameter itself, so this jig can move with certain angle follow the diameter of that blade. So your outside diameter will be grind smoothly.

This jig is for 'stage 01' blade. I have done until stage 05. And my custemor is Airfoil Services. For more information just leave your comment. I will answer for a basic using Solidworks also..

TQ..

Gear Box

Dis is a gearbox dat i already reverse engineering. I draw by do the metrology using all mesurement equipment my company have to convert it into 3D in SolidWorks software. After I completed the job, i got something intersted to the system it self that under my calculation it can be improve. So i change a little bit design and comeout with my new idea for the WormGearBox with extra torque applicable.. And this gearbox actually already installed in our company product. The product dat i said is a auto racking in and racking out system (A-TRAC) for the circuit breaker SNS 33kv and 11kv brandname.. This product already installed at Sub Station Tenaga Nasional Berhad (TNB). The succesfull of this product is not just came from simple idea like the picture above, our company has done the RND for 3 years.. And at last, the product is better and better. Even our company has compitetor, TNB guys said dat my product is good and no problem occured.. Yeah!! cool =P

for more information, contact me or just leave a comment.

i'll answer all ur ques.

TQ

LasT tImE

Clamping

hOhO.. 1st time aku masuk keje, aku telah di adaptasikan oleh kegunaan2 dan cara pengunaan Solid Works.. Bukan aku tak pernah buat bende2 nie, mase kat Uitm dulu pun aku ader amek subjek nie.. Tapi aper yg aku blaja ialah microstation yg lame n susah gile command2 die.. tapi bile aku blaja Solid Works nie mcm best plak.. senang n user friendly la org kate.. dats a long time ago when i was introduced to this thing.. kira adik2 lagi la... dpt2 buat clamping nie pun kire hebat ape.. huhu.. nanti aku akan tunjukkan lagi hasil kerja aku dlm solid works nie.. see ya (^^,)v