MachineDesigner

In order to complete the job

2008-12-23T22:51:00.000-08:00

Hye~

Assalamualaikum and salam sejahtera

1st of all i'm so sorry for being gone and quite busy last few month and dun have a time to spend at my seaputdesign.blogspot for all ur information, i'm doing the job drawing and now inculding to fabricate what i'm draw follow the customer need.

No more mumbling2 words, just tell u all what i'm doing rite now..

About 2 to 3 months ago i just ready for the drawing like the no 1 picture for completing the assembly of all component for this machine "Core Puller unit" that sub machine for making brick.

And about 2 to 3 months ago also i'm doing the "Mould strecther & combo brick maker" like no 2 picture.. (its 2 to 3 means in the same months)

Let see, now i'm fabricate meself the core puller unit *see pic no 3

very though job that i handled individual.. All job involved in it i must handled me self. Just the things that i can't do or can't do in my workshop i'll send it to sub-contractor like machining/milling/boring n etc..

Ok, lets me brief shortly what kind of machine/work/job i done here.

The Project Managment Sdn. Bhd [Brick supplier *more on civil work/building n etc] is our customer for this project. This machine actually sub machine to make the brick. Have many type of brick for the example is, strecther, bond, half tounge, corner and etc. In order to make a different brick follow the customer needed, i should desing the mould for the required dimension given by the customer.

*Added information, mould and core puller design by meself base at our company Francserve (M) Sdn. Bhd. and ZOF Technik (M) Sdn. Bhd., mould fabricated at China, and Core Puller fabricated at ZOF Technik workshop/factory.

Jig and Fixture ~Turbine Blade Repaire

2008-05-22T21:06:00.000-07:00

This is a jig for a turbine blade. Did u know how turbine blade are/is? In one turbine impeller normally have many blades(this is one of the turbine type). The blades are placed around the shaft to become a one big impeller. If this is one of the type of turbine impeller, normally the blades will worn at outside diameter. To repaire the blade, we welding the worn side and regrinding it. This jig designed to hold/grip the blade when grinding process. The blade have their diameter itself, so this jig can move with certain angle follow the diameter of that blade. So your outside diameter will be grind smoothly.

This jig is for 'stage 01' blade. I have done until stage 05. And my custemor is Airfoil Services. For more information just leave your comment. I will answer for a basic using Solidworks also..

TQ..

Gear Box

2008-05-15T02:07:00.001-07:00

Dis is a gearbox dat i already reverse engineering. I draw by do the metrology using all mesurement equipment my company have to convert it into 3D in SolidWorks software. After I completed the job, i got something intersted to the system it self that under my calculation it can be improve. So i change a little bit design and comeout with my new idea for the WormGearBox with extra torque applicable.. And this gearbox actually already installed in our company product. The product dat i said is a auto racking in and racking out system (A-TRAC) for the circuit breaker SNS 33kv and 11kv brandname.. This product already installed at Sub Station Tenaga Nasional Berhad (TNB). The succesfull of this product is not just came from simple idea like the picture above, our company has done the RND for 3 years.. And at last, the product is better and better. Even our company has compitetor, TNB guys said dat my product is good and no problem occured.. Yeah!! cool =P

for more information, contact me or just leave a comment.

i'll answer all ur ques.

LasT tImE

2008-05-14T03:18:00.000-07:00

Clamping

hOhO.. 1st time aku masuk keje, aku telah di adaptasikan oleh kegunaan2 dan cara pengunaan Solid Works.. Bukan aku tak pernah buat bende2 nie, mase kat Uitm dulu pun aku ader amek subjek nie.. Tapi aper yg aku blaja ialah microstation yg lame n susah gile command2 die.. tapi bile aku blaja Solid Works nie mcm best plak.. senang n user friendly la org kate.. dats a long time ago when i was introduced to this thing.. kira adik2 lagi la... dpt2 buat clamping nie pun kire hebat ape.. huhu.. nanti aku akan tunjukkan lagi hasil kerja aku dlm solid works nie.. see ya (^^,)v